Adhesive and Sealants

Brand: Marston-Domsel

1. Sealing

A. Hylomar is temperature resistant from -50 °C to +250 °C under permanent and up to +300 °C under temporary strain. It is a sealing solution for all points, which must be absolutely sealed – even under large loads. It is resistant to oil, grease, fuels, water, gas, anti-freeze, air, …
Hylomar Cleaner removes grease from the seal surface.

Uses:
– Automotive & motorcycle industry
– Tractor building
– Motor & electrical industry
– Foodstuff industry
– Gas, water, and electricity power stations
etc.

B. Hylosil
Hylosil is a one-component silicone sealant vulcanizes – hardens – at room temperature. Excellent resistor to cold, heat, and aging within a wide application spectrum. It is available in 4 colors: black, transparent, aluminum, and red. Red temperature resistant up to 300 °C.

Uses:
– Automotive and motorcycle industry (transmission, headlights, spur wheel covers, door innings, etc)
– Refrigerator industry
– Several areas in households
– Automotive and electrical industry
– Mechanical engineering and transmission manufacturing
– Foodstuff industry
– Gas, water, and electricity power stations
etc.

C. MS-Polymer
Hylo-MS is a high quality adhesive and sealant based on MS Polymer that adheres to many surfaces. It is available in white, black, grey and transparent.
It does not contain isocyanate and silicone.
Suitable for varnishing and coating as well as wet-on-wet application.
Remains elastic.
It is resistant to weather, UV, water and chlorine.

Uses:
– Automotive
– Refrigerator industry
– Several areas in households
– Automotive and electrical industry
– Mechanical engineering and transmission manufacturing
– Foodstuff industry
– Gas, water, and electricity power stations
etc.

D. Hylo-MK 3000
Hylo-MK 3000 is a fixing adhesive with a high initial adhesion level. It bonds heavy parts to vertical surfaces and on ceilings. It can bond heavy parts such as stones, wood, tiles and metals to ceiling and walls without yielding or slipping. It is odorless.
It is resistant to UV radiation, weathering effects, water, chlorine, etc.
It can be over-painted and over-coated.
The parts to be bonded should be completely clean and free of oil and grease.

Uses:
– Bonds metal, wood, and plastics with each other.
– Sheet-metal working
– Furniture industry
– Equipment engineering
– Air-conditioning technology
– Motor vehicle construction
– Window making
– Areas where silicon could not be used

E. Hylomar Cleaner
Hylomar Cleaner removes oil and grease from sealing surfaces, enabling immediate application of a seal.

Uses:
– Automotive and motorcycle industry
– Motor and electrical industry
– Mechanical engineering and transmission manufacturing
– Foodstuff industry
– Chemical and petrochemical industry
– Gas, water, and electricity power stations
etc

2. Bonding

A. Mirror bonding
The metal mirror base is glued to the windscreen internally. It is an extremely powerful adhesive set for bonding rear view mirror to windscreens.

B. CA Adhesives
Cyanoacrylate-Adhesive is used for all bonding as well as connections by metal with rubber, plastics and wood.

3. Retaining

A. Surface Sealing
Surface sealing is suitable for all applications e.g. gearboxes and crankcases, flange connections, bearing caps, oil sumps, and differential case covers.

B. Screw Retainer
Screw retainer protects screws, nuts and stay bolts from loosening due to vibrations, and seals immediately.

C. Bushing and Bearing Fastening:
Socket and bearing support is an anaerobic liquid plastic which solidifies contact with metals without oxygen. It is resistant to petrol and brake fluid as well as other substances. They are delay suited to support bearings on rollers or in bearing housing (Bearings, sockets, rollers, hubs).

D. Screw Thread Sealing
Screw thread sealing protects and seals screw threads against gas, water, hydrocarbon, oil, liquid gas and many chemicals.

4. Others

A. Copperpaste
Cuprous paste is a high temperature lubricant for all separating processes at high temperatures. Temperature range is between -30°C to +1300°C. It is used for installation, maintenance and repairs of disc brakes, leads, springs, exhaust screws, battery poles, etc.

B. Aerosole
Aerosols are used as: brake cleaner, leak-indicating spray, stainless steel profi care, multi foam cleaner, cooling spray, anti-seize ceramic, etc.
Mention the use of the Aerosole when buying to ensure you have the correct spray.

  • adhesive-sealants

    adhesive-sealants

  • adhesives-sealants

    adhesives-sealants